1 |
The current is measured in |
volts
watt
ampere
ohm
|
2 |
Ammeter is used to measure |
voltage
resistance
voltage and current
current
|
3 |
A galvanometer in which the coil comes to rest quickly after the current passed through it, or the current stopped form flowing through it, is called |
dead beat galvanometer
stable galvanometer
shunt galvanometer
sensitive galvanomter
|
4 |
The current in microamperes required to produce one millimeter deflection on a scale placed one meter away from the mirror of the galvanometer, defined the sensitivity of |
ammeter
voltmeter
galvanometer
avo-meter
|
5 |
The torque per unit twist of coil is called |
proportionality constant
gravitational constant
boltzman constant
coupling constant
|
6 |
Method "lamp and scale arrangement" used to measure the |
angle of deflection
restoring torque
magnetic field strength
current
|
7 |
If the value of galvanometer constant k = C/BAN is made small, the galvanometer can be made |
Sensitive
Accurate
Stable
None of these
|
8 |
The angle of deflection of coil can be measured by the |
one method
three method
two method
none of these
|
9 |
A shunt resistance parallel to the galvanometer is used to convert it into |
avometer
millimeter
voltmeter
none of these
|
10 |
In a moving coil galvanometer, the deflecting couple depends upon |
area of the coil
number of turns of coil
value of magnetic field
all of the above
|
11 |
For the conversion of galvanometer into voltmeter, we connect a |
small resistance in series with galvanometer
small resistance in parallel with galvanometer
high resistance in parallel with galvanometer
high resistance series with galvanometer
|
12 |
The working of galvanometer depends upon torque exerted on a current carrying coil in |
magnetic field
electric field
gravitational field
nuclear field
|
13 |
Galvanometer is a device used for the detection of |
voltage
current
temperature
pressure
|
14 |
The working of all DC electric meters (galvanometers, ammetersand voltmeters) depends upon |
Heating effect of current
Chemical effect of current
Magnetic effect of current
Electromagnetic effect of current
|
15 |
To convert galvanometer into ammeter we connect |
small resistance in parallel with galvanometer
small resistance in series with galvanometer
high resistance in series with galvanometer
high resistance in parallel with galvanometer
|
16 |
The galvanometer can be made sensitive if the value of the factor C/BAN is |
constant
small
large
none of these
|
17 |
A galvanometer is an instrument used to |
measure voltage across a circuit
detect current in a circuit
measure current flowing through a circuit
none of these
|
18 |
The current sensitivity of the galvanometer is |
C/BAN
BAN/C
CAN/B
CBN/A
|
19 |
The vector representation of force experience give the direction of |
magnetic field
current
length of conductor
force
|
20 |
The fractional change in resistance per kelvin is known as |
temperature coefficient
resistance coefficient
super temperature
critical temperature
|
21 |
If the length of the conductor is double and its cross sectional area is halved, its conductance will |
Increase four fold
Become one-fourth
Become one-half
Remains unchanged
|
22 |
The resistivity of a substance depends upon the |
length
mass
area
temperature
|
23 |
The SI unit of conductivity is |
ohm-m
ohm<sup>-1</sup>m<sup>-1</sup>
ohm-m<sup>-1</sup>
ohm<sup>-1</sup>m
|
24 |
The unit of conductance is |
ohm
meter
mho
ohm-meter
|
25 |
The unit of resistivity is |
ohm
ohm-m<sup>2</sup>
ohm-meter
ohm-m<sup>-1</sup>
|
26 |
Resistance of a conductor is increased, the currant will |
Decrease
Increase
Remain the same
None of these
|
27 |
The resistance of a conductor does not depend on its |
mass
resistivity
length
cross-sectional area
|
28 |
Three resistance 500,500 and 50 ohms are connected in series across 555 volts mains. The current flowing through them will be |
0.52 A
1 mA
0.7 mA
1.4 A
|
29 |
Three resistors of resistance 2,3 and 6 ohms are connected in parallel, their equivalent resistance is |
11.0 ohm
1.0 ohm
7.0 ohm
3.0 ohm
|
30 |
If the resistance of 2 ohm and 4 ohm are connected in parallel, the equivalent resistance will be |
6 ohm
4 ohm
zero ohm
1.33 ohm
|